Home

Careers

Contact Us

Fileworx Home

Line Matrix Printers

Dot Matrix Printers

Laser Printers

Passbook Printers

Terminals & Emulators

Ameer 420

SEDCOTERM

Arabization Driver

Terminals & Emulators "Ameer 420"

Ameer 420 Brochure

  • Compatible with BULL, Data General, DEC, HP, IBM AS400, IBM RISC, NCR and Unix systems.

  • Supports 25 different Arabic code pages and standards.

  • Contains many Arabic fonts with the ability to display two fonts at the same time.

  • Comprehensive menu-driven setup facility.

  • Compatible with SEDCO, ALIS and Al-Arabi terminals amongst many others.

  • Bilingual Arabic/Latin, 7-bit and 8-bit support.

  • Built-in Arabization for slave printer.

  • Selectable Arabic or Hindi digits display.

  • Complete set of Arabic Tashkil.

  • Dual session and dual host capability.

  • User-defined Arabic character set facility.

Display Features
  • Colors: Paper-white (P188).

  • Monitor: 14-inch diagonal flat screen, non-glare screen with selectable overscan mode (light screen).

  • Sessions: Split screen/full screen session switch. Software support for windowing display.

  • Refresh: 70-85Hz (in VT320 mode 25x80 column); non-interlaced.

  • Adjustments: Brightness and contrast. Large, side-mounted, easily accessible, attractively designed controls.

  • Tilt and swivel base: Tilt + 5 degree, -20 degree; Swivel 90 degree right, 180 degree left.

Alphanumeric features

Personalities:

  • DEC: VT420, VT320, VT220, VT100, VT52.

  • Wyse: WY-85.

  • Data General: D217.

Page Formats

  • Single Session mode: Five 24-line pages, Four 25-line pages, three 36-line pages, two 48-line pages, one 72-line page.

  • Dual Session/Dual Host Mode: Two 24-line pages, one 25-line page, and one 36-line page.

Character

  • Display Size: 24 lines per screen, 36 lines per screen, 48 lines per screen.

  • Character Sizes: 80 column: 10x8, 10x10, 10x16, 15x12.

  • 132 column: 9x16, 9x10, 9x8.

  • Fonts: Latin font, NASKH, KOFI, HADITH, and ASRI.

  • Attributes: All combinations of reverse, bold, underline, dim, blink, and blank.

  • Cursor: Bilingual, Underline, Block, Blink, Steady or Off. Cursor vertical coupling and page coupling supported.

 
Code Pages Supported 128 ASCII characters, ASMO 449, ASMO 449+, ASMO 708, ASMO 708+, AL-ARABI, AMEER, DG, COMTERM 341, COMTERM 541, NCR-96, NCR ASMO-708, ARABIC-8, IBM NLS, IBM/AS400, ARABIC, ARCII, DEC/8/ASMO, CODAR-UFD, ADOS 710, NAFITHA, SAKHR, ZENTEC, BEEHIVE, Arabic Windows, and User Defined.

 

Keyboard

  • Design: Low-Profile, two position tilt; detached with 1.5 meter coiled cable. Mechanical key switch.

  • Layouts: 105 key ANSI (VT420 style).

  • Function keys: Fully programmable from host or setup, savable in memory.

 

Communications
  • Modes: Full duplex, half duplex, local, block.

  • Monitor: Display controls.

Ports
  • Main: User-definable RS-232 male DB-25 connector and Wyse modified modular 423 (DEC MMJ and RJ-II compatible). Bi-directional up to 38.4 KBaud.

  • Secondary host: Wyse modified modular 423 (Dec MMJ and RJ-II compatible) Bi-directional up to 38.4 KBaud.

  • Printer: PR Wyse modified modular 423 (DEC MMJ and RJ-II compatible) Bi-directional up to 38.4 KBaud.

  • Flow Control: Software (XON/XOFF), hardware only (DTR), and combined HW/SW.

  • Session Support: Dual host support (two sessions over two communication lines); Dual host support (two sessions over one communication line, DEC SSU protocol).

Additional Features 
  • Local Editing, Copy and Paste:
    Allows text from the screen to be copied to a clipboard and subsequently inserted within the same session or to another session. Contents of the clipboard are transmitted to the host(s).

  • Rectangular Area Operations:
    Allows the manipulation of rectangular areas of text within page memory. These rectangular areas can be copied within or between sessions, erased, filled with a designated character or visual character attribute.

  • Split Screen Windowing Operation:
    Allows the user to define separate display areas with horizontal boundaries whereby different sessions can be displayed concurrently.

Environmental conditions
  • Temperature:
    Operating range: 50 degrees to 104 degrees F (10 degrees - 40 degrees C).
    Non-operating range: 14 degrees to 140 degrees F (-10 degrees to 60 degrees C).

  • Humidity: 20% to non-condensing.

  • Altitude Operating range: 0 to 10,000 feet (0 to 3,000 meters).

  • Power: 90 to 264 VAC, 47-63 Hz.

Regulatory Compliance Worldwide
  • Safety: UL listed, CSA certified, GS-TUV approved, EN 60950 compliant.

  • RF Interference: FCC Class A, VDE Class B Radio Protection Mark, EN55022/CISPR 22 Class A compliant.

  • Ergonomics: ZH1/618.

  • Communications: FTZ compliant.

  • MPR 1990: 10 compliant. (AMEER 420 ES version only).

Physical Features
  • Height: 12.8 in (325 mm).

  • Width:   12.8 in (325 mm).

  • Depth:  12.4 in (315 mm).

  • Footprint: 10.75 in x 8.75 in (275 mm x 222 mm).

Shipping Weight Terminal and keyboard: 25 lb. (11.3 Kg).
Power Universal auto-sensing 90 to 264 VAC @ 47-63 Hz.
Warranty One year limited warranty within country of purchase.

 

For more information about SEDCO products, contact Sales

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright 2007 SEDCO