|
 Ultima 90 English Brochure
- Universal Transparent Arabization.
- Multiple Arabic and Latin Fonts.
- Various Paper Paths Including Flat Bed.
- Various Paper Loading Methods Available.
- Up to 8 copies + Original.
- Various Interface Options.
- LCD Panel for Easy Setup.
| Speeds (cps) |
|
15cpi |
12cpi |
10cpi |
| Draft |
1215 |
972 |
810 |
| Enhanced Draft |
913 |
730 |
609 |
| NLQ |
540 |
432 |
360 |
| LQ |
270 |
216 |
180 |
|
| Printing Features |
- Bi-directional with logical seeking in text and graphics mode.
- 24-wire impact dot matrix
- Printing columns: 136 columns at 10cpi
- User friendly LCD front panel
- Max. resolution: 360x360 dpi
- Line Feed Speed: 1/6” line per 50ms
- Form Feed Speed: 12” per sec (continuous feed)
|
| Paper handling |
- Copies: Original + 8 carbonless copies.
- Max. paper thickness: 0.65mm
- Manual and auto continuous form/cut sheet switch function.
- Manual and auto paper thickness adjust function.
|
| Paper Dimensions (mm) |
| |
Width |
Length |
| Cut Sheet |
55 - 420 |
70 - 297* |
| Continuous Form |
102 - 420 |
Over 102** |
* 70-420 for large cut sheet table.
** Over 127 for rear tractor.
|
| Paper Feeding |
Continuous Form
Push tractor – Front in/Rear out; Rear in/Front out.
Cut sheet
Front in/Front out; Front in/Rear out;
Rear in/Front out; Rear in/Rear out.
|
| Paper Paths* |
 |
|
 |
| Continuous Paper With Tractor |
|
A sheet of paper with Cut Sheet Table and Rear Stacker |
 |
|
 |
A stack of sheet With Cut Sheet Feeder and Rear Stacker
*some paper paths require optional accessories |
|
| Paper Loading |
Up to 4 paper feeds can be set at the same time.
| One Cut Sheet Table + One CSF (Back) +Rear Stacker + Two Tractors |
One Cut Sheet Table +Two CSFs (Front & Back) + One Rear Stacker +One Tractor |
|
| Emulations |
Fujitsu DPL24C PLUS, Epson ESC/P2, IBM XL24E, Microsoft Windows Driver Available.
|
| Barcode |
Code 3 of 9, UPC Type A, UPC Type A with check character, Codabar(NW7), EAN13, EAN8, Industrial 2 of 5, Matrix 2 of 5, Interleaved 2 of 5, Code 128.
|
| Latin Fonts |
Latin bitmap
Courier 10, Prestige Elite12, Boldface PS, Compressed, Draft 12, High-speed draft 12, OCR-B 10, OCR-A 10, Correspondence 10, PICA10.
Latin scalable
Courier, Nimbus Sans®, Timeless (Normal, Bold, Italic)
|
| Arabic features |
Bilingual Operating Modes
7-bit Arabic:
- with SWCs.
- with Balancing SWCs.
- with ESCs.
8-bit Arabic:
- pure
- with neutrals
- with SWCs
- with balancing SWCs
- with ESCs.
Code Pages:
ASMO 449,ASMO 449 plus, ASMO 708, ASMO 708 plus, ARCII, ASCII, EMULOG, AMEER, AL-ARABI, BEEHIVE,ZENTEC, DEC/8/ASMO, IBM APC, IBM X-BASIC, CODAR-UFD, ICL CODAR, ICL ASMO-708, ICL Cross Range Minus, NCR 64, NCR 96. NCR ASMO-708, Data General, HP Arabic-8, HP Enhanced , COMTERM 341, COMTERM 348, COMTERM 541, ASMO-708/FRENCH, NAFITHA,Farsi FRENCH-1/ASMO 708, INT’L upper, MUSSA’ED Alarabi/2, SHAKER upper, ADOS-708, ADOS-709, ADOS-710/96, ADOS-710/128, ADOS-711, WANG ADOS-864, Arabic Windows, SEDCO/ESPRIT, User Defined and more.
Arabic Fonts:
Naskh, Naskh Bold, Kofi, Kofi Bold, Req’a, Haydar, Hadeeth, Asri Resident and downloadable fonts.
|
| Available Models |
Available Models:
- Parallel + USB (LAN upgradeable).
(Standard)
- Parallel + RS232C (On order).
|
| Optional Accessories |
- Cut Sheet Feeder (should be used with Rear stacker). Common to Rear and Front.
- LAN 10BASE-T, 100 Base-TX, TCP/IP Protocol
- Rear Stacker
- Small Cut Sheet Table (Should be installed for Front CSF)
- Large Cut Sheet Table (Should be installed for Front CSF)
- Tractor (Common to Rear and Front)
 |
 |
 |
| CSF (Front & Back) |
Rear Stacker |
Cut Sheet Table (Large) |
 |
 |
|
| Cut Sheet Table (Small) |
18 million characters can be printed. |
|
|
| Physical & Operating Features |
- Input Buffer: 128KB
- Input Voltage:
220-240V AC, 50-60Hz (Standard)
110-120V AC, 50-60Hz (On order)
Power consumption:
|
110V |
220V |
Idle: |
10W |
10W |
Average: |
275W |
250W |
Max.: |
530W |
480W |
- Temperature: 5 to 38 C.
- Humidity: 20 to 80%
- Dimensions (WxDxH):
600x350x290mm
- Weight: 22Kg.
- Noise: 56dBA
- MTBF: 20,000H (25% duty cycle)
- MTTR: 0.5H
- Print Head Life: 400 million strokes (each wire)
- Ribbon Life: 18 million
|
|
